Performed by: blytz
Parts:
Rubber Nipple (I used the second smallest one on an assortment tree purchased at AutoZone
Small Air Filter(Not neccessary, maybe an R/C Engine Filter)
Побольше:
http://colt.aquadrea...diff/FPRMOD.jpg
This is the drivers side of the engine bay, looking toward the passenger's side of the car. This shot is of the intake manifold and fuel rail.
The firewall is in the right of the picture. It is the opposite on 97+ Mirages.
Unplug the hose outlined in green. It connects to the intake manifold and fuel rail at the green circles.
Use the nipple on the intake manifold where the hose was connected.
If you choose, connect the small air filter to the fuel rail.
This mod allows slightly more fuel to the injectors. It is most efficient on 1.5l cars[/size][size=7]
